3.Modify above program to do following operations. (Write new program) 1) Display current contents of the file. 2) Add one more item at the end of file. 3) Again display contents of appended file. 4) Display total no. of objects in the file. 5) Display total no. of bytes in the file. 6) Take item no. from the user, modify the details of that item. 7) Again display contents of modified file. 8) Use proper error handling functions to prevent errors

-

 /*J_5_P_3

Modify above program to do following operations. (Write new program)

1) Display current contents of the file.

2) Add one more item at the end of file.

3) Again display contents of appended file.

4) Display total no. of objects in the file.

5) Display total no. of bytes in the file.

6) Take item no. from the user, modify the details of that item.

7) Again display contents of modified file.

8) Use proper error handling functions to prevent errors

*/

#include <iostream.h>

#include <conio.h>

#include <fstream.h>

#include <string.h>


int main()

{

    clrscr();

    char ch;


    ifstream in;

    in.open("inventory.txt");


    while ((ch = in.get()) != EOF)

    {

cout << ch;

    }

    streampos begin, end;

    in.open("inventory.txt");


    begin = in.tellg();

    in.seekg(0, ios::end);

    end = in.tellg();

    in.close();


    cout << "size is : " << (end-begin) << " bytes.\n";

    getch();

    return 0;

}

Comments

Post a Comment

Popular posts from this blog

Quetion 6 : Consider the "in-order-issue/in-order-completion" execution sequence shown in f In Figure Decode OWE Execute 12 12 12 14 16 13 16 13 15 15 16 Write 024/06/02 11 3 4 11 12 13 13 N 15 16 a. Identify the most likely reason why I could not enter the execute fourth cycle. stage until the [2] b. Will "in-order issue/out-of-order completion" or "out-of-order issue/out-of-order completion" fix this? If so, which? Explain

-
Answer:   a. Identify the most likely reason why I could not enter the execute stage until the fourth cycle. One likely reason an instruction couldn't enter the execute stage until the fourth cycle is due to data hazards or resource conflicts: 1. Data Hazards: If the instruction depends on the result of a previous instruction that hasn't completed yet, it cannot proceed to the execute stage. This is often referred to as a Read After Write (RAW) hazard. 2. Resource Conflicts: If the required functional unit for execution (e.g., an ALU) is occupied by another instruction, the instruction will have to wait until the resource becomes available. b. Will "in-order issue/out-of-order completion" or "out-of-order issue/out-of-order completion" fix this? If so, which? Explain In-order issue/out-of-order completion  might help if the problem is related to instructions that can complete earlier being delayed by instructions that take longer to execute. This allows the...
Read more

Question 5:

-
  a. Consider a machine which supports the following two instruction schedules for R class and I class instructions. Assume an instruction mix of 70% R class and 30% I class instructions. Assume that IF steps take 30 nano seconds, MEM steps of instruction execution require 50 nanoseconds and the other steps require 40 nanoseconds 0 1 2 3 4 R Class IF ID EX WB I Class IF ID EX MEM WB For a multi-cycle implementation, i. What is the minimum clock cycle time? ii. How long does sit take to execute 200 instructions in nanoseconds? b. Given a deeply pipelined processor and a branch-target buffer for conditional branches only, assuming a misprediction penalty of 5 cycles and a buffer miss penalty of 4 cycles, 95% hit rate and 90% accuracy, and 20% branch frequency. How much faster is the processor with the BTB vs. a processor that has a fixed 4-cycle branch penalty? ANSWER: Part (a): i. Minimum Clock Cycle Time: The mini...
Read more

7.Write a program to read a list containing item name, item code and cost interactively and produce a three-column output as shown below. NAME CODE COST Turbo C++ 1001 250.95 C Primer 905 95.70 ------------- ------- ---------- ------------- ------- ---------- Note that the name and code are left-justified and the cost is right-justified with a precision of two digits. Trailing zeros are shown.

-
 /*J_4_P_8 Write a program to read a list containing item name, item code and cost interactively and produce a three-column output as shown below. NAME                CODE      COST ======================= Turbo C++        1001          250.95 C Primer              905           95.70 ------------- ------- ----------------- ------------- ------- ----------------- Note that the name and code are left-justified and the cost is right-justified with a precision of two digits. Trailing zeros are shown. */ #include <iostream.h> #include <iomanip.h> #include <string.h> #include <conio.h> class item {         char name[40];         int code;         float cost; public:         void get_data(char *n, int c, float co)...
Read more